Product outline of adhesive tape insect trap, MPX-2000/MP-2300 series **Product outline 2/7**

— Product comparison —

-1- Electric insect killer
The insects are attracted with a lamp and electrocuted instantly when they come into contact with the high-voltage grid.

-Trapping capacity:May not capture small insects that do not come into contact with the grids. Varying watts for lamps.
-Number of insects captured:Insects are accumulated in the receiver on the bottom of the device.
-Maintenance:Turn off the power and clean the stains on the device and the receiver
-Cleanliness:High voltage applied when the insect is caught electrocute the insects and causes them to disperse, including the area around the apparatus.
-Prevention of foreign matter contamination:Not suitable for installation indoors due to possible scattering of insect carcasses.
Does not allow the effectiveness of the actions to be measured and changes in insect count to be monitored
-Annual running cost/1(one) 20 W lamp used (in Japan):
Lamp- USD 8.00
Power consumption 30 W- USD 67.44(lamp, high voltage)
**TOTAL USD 75.44

-2- Suction type insect trap
The insects are attracted with a lamp and suctioned with a fan before they eventually die.

-Trapping capacity:Depends on the suction capacity and area of the fan. Varying watts for lamps
-Number of insects captured:Insects are accumulated in the trapping container below the fan.
-Maintenance:Turn off the power and clean the trapping container.
-Cleanliness:Unhygienic condition from excessive accumulation of insects.
-Prevention of foreign matter contamination:Can be used as a measure but considered insufficient. Does not allow the effectiveness of the actions to be measured and changes in insect count to be monitored.
-Annual running cost/one 20 W lamp used (in Japan):
Lamp: USD 8.00
Power consumption 30 W: USD 67.44(lamp, fan)
**TOTAL USD 75.44

-3- Adhesive type insect trap
The insects are attracted with a lamp and trapped with adhesive tape.

-Trapping capacity:Able to capture large and small insects Large insects may fall on the floor of the trap due to their weight.（Floor protection sheet is available as an optional accessory.）
-Number of insects captured: Insects are caught on the surface of the adhesive tape.(Front and back surface of two insect trapping tapes)
-Maintenance:Remove the grids and replace the insect tapes.
-Cleanliness:Prevents excessive accumulation of captured insects, and the adhesive tape maintains cleanliness around the trap device.
-Prevention of foreign matter contamination:Allows monitoring and considered useful for introduction as HACCP measure.
-Annual running cost/one 20 W lamp used (in Japan):
Lamp: USD 8.00
Power consumption 20 W: USD 45.00 (lamp)
Insect trapping tapes:(8 sheets used, every 3 months): USD 22.40
**TOTAL USD 75.40

 [ Product brochure ]